HomeMy WebLinkAboutBLD2024-00016 Addition, Remodel - BLD Inspections - 2/20/2025 �l�`, MASON COUNTY 615 W.Alder St.Bldg 8,SHELTON,WA 98584
COMMUNITY SERVICES SHELTON:360�27-9670,EXT 352
BELFAIR:360-275-4467,EXT 352
+ / Building,Planoin,%Environmernal Health Community Healtli ELMA:360-482-5269,EXT 352
www.co.mason.wa.us
INSPECTION CARD AND CERTIFICATE OF OCCUPANCY**
To schedule an inspection call or visit http://www.co.mason.wa.usicommunity-services/bid-inspection.php
Permit Number BLD20 24-0 001 6 Date Issued 0 3/1 9120 24 Issued By A-1..,..,.5
Project ADDITION,CONVERT TO HEATED SPACE AND REMODEL
Site Address 297 SE Bayview Rd
Applicant MILLER RONALD F
Contractor NW BUILDERS&RENOVATION
Contractor Phone 253-433-1478
Primary Code UPC IBC,IRC,IFC,IEC,IMC,& Type
Permit Type ADDITION OR REMODEL- Occupancy
RESIDENTIAL
-APPROVED PLANS MUST BE ONSITE FOR ALL INSPECTIONS.
-DO NOT PROCEED BEYOND EACH STAGE OR COVER WORK UNTIL APPROVAL IS GRANTED.
-THIS CARD MUST BE POSTED IN A CONSPICUOUS LOCATION,FRONT OF THE PREMISES IS BEST FOR MAKING ENTRY.
-ALL PERMITS EXPIRE 180 DAYS AFTER THE PERMIT IS ISSUED OR 180 DAYS AFTER DATE OF LAST INSPECTION.
-OWNER/AGENT IS RESPONSIBLE FOR REQUESTING ALL INSPECTIONS THROUGH FINAL INSPECTION.
**THIS STRUCTURE MAY NOT BE USED OR OCCUPIED UNTIL ALL APPROVALS ARE GRANTED.**
PRIOR TO CALLING FOR FINAL INSPECTION,ALL CONDITIONS OF THE PERMIT MUST BE MET
Public Works Access/Driveway Other
Health Septic Well
Deptartment
Planning Site Inspection
Department
Fire Marshall Fire Apparatus Access Fire Sprinkler
Auto Fire Alarm Hood and Duct
Other Final
Building Building Official: Community Services Designee
Department
Concrete Setbacks Slab
Footing PerimeteF Point load Footing
Footing Interior Footing Decks/,Porches
Foundation Stem Walls Other
Rough-In Groundwork Plumbing Framing _
Groundwork Mechanical Plumbing
Groundwork Gas Pipe Mechanical
Gas Piping Shear Wall Nailing
Underfloor
Other
Insulation Slab .13'Z L Ceiling '
Floor Vaulted Ceiling
Walls Vapor Barrier
Other
Wallboard Interior Wall Brace Panels Fire Walls
Nailing
Other
Final Building
Manufactured Setbacks Setup
Home
Concrete Foot/Runners Final
Other
ff*Vl
�W( 4 sau6-k eof'ge✓J510t4
INSPECTION RESULTS Page 1
Department of Community Development
CONM uC couNn sesvtcss 615 W Alder St,Shelton,WA 98584
co w.t
-^--- (360)427-9670
Application# BLD2024-00016 Appplication ADDITION OR REMODEL-RESIDENTIAL Application# BLD2024-00016
Ty
Parcel# 320225000901 Site Address 297 SE Bayview Rd Shelton,WA 98584
Comments Total Action Points,
818124 NN
1.FOOTING FORMS ARE INCOMPLETE ON THE
Nicole Norris FOOTING INSPECTION 08/08/2024 FAIL DRIVEWAY SIDE.FORM BOARDS ARE REQUIRED TO
BE IN PLACE AT TIME OF INSPECTION.
ONCE ADDITIONAL FORM IS IN PLACE.SEND PHOTO
TO NNORRISQMASONCOUNTYWA.GOV
GENERAL OBSERVATIONS AWAITING
;-..__...........,_........ ,...__,...___._. _�__._
INSPECTION
Description Status Status Date
MASON COUNTY INSPECTION RESULTS Pagel
Department of Community Development
COMMUNITY DEVELOPMENT 615 W Alder St, Shelton,WA 98584
Permit Assistance center,Building,Planning (360)427-9670 ext. 352
Application # BLD2024-00016 Application Type ADDITION OR REMODEL- Owner MILLER RONALD F
RESIDENTIAL
Parcel # 320225000901 Site Address 297 SE Bayview Rd Shelton, WA 98584
Inspector Inspection Type Date Status Comments
9-19-24 DEC
Drew Carlson FRAMING INSPECTION 09/19/2024 FAIL CHANGE IN ROOF LINE REQUIRES REVISION CONTRACTOR WILL SUBMIT
REVISION. OK TO DRY IN STRUCTURE
s -
INSPECTION RESULTS Pagel
MASON COUNTY INSPECTION
of Community Development
COMMUNITY DEVELOPMENT 615 W Alder St, Shelton,WA 98584
Permit Assistance Center.,Building,Planning (360) 427-9670 ext. 352
Application # BLD2024-00016 Application Type ADDITION OR REMODEL- Owner MILLER RONALD F
RESIDENTIAL
Parcel # 320225000901 Site Address 297 SE Bayview Rd Shelton, WA 98584
Inspector Inspection Type Date Status Comments
9-26-24 DEC
NO PLANS ON SITE. REVISION HAS NOT BEEN COMPLETED. COMPLETE
ELECTRICAL INSTALLATION AND PROVIDE L&I COVER STICKER.
Drew Carlson FRAMING INSPECTION 09/26/2024 FAIL
9-19-24 DEC
CHANGE IN ROOF LINE REQUIRES REVISION CONTRACTOR WILL SUBMIT
REVISION. OK TO DRY IN STRUCTURE
k
INSPECTION RESULTS Page
MASON COUNTY Department of Community Development
COMMUNITY DEVELOPMENT 615 W Alder St, Shelton, WA 98584
Permit Assistance Center,Building,Planning (360) 427-9670 ext. 352
Application # BLD2024-00016 Application Type ADDITION OR REMODEL- Owner MILLER RONALD F
RESIDENTIAL
Parcel# 320225000901 Site Address 297 SE Bayview Rd Shelton, WA 98584
Inspector Inspection Type Date Status Comments
10-1-24 DED
1)L&I cover inspection required
send documentation to ddobson@masoncountywa.gov
9-26-24 DEC
Dave Dobson FRAMING INSPECTION 10/01/2024 FAIL NO PLANS ON SITE. REVISION HAS NOT BEEN COMPLETED. COMPLETE
ELECTRICAL INSTALLATION AND PROVIDE L&I COVER STICKER.
9-19-24 DEC
CHANGE IN ROOF LINE REQUIRES REVISION CONTRACTOR WILL SUBMIT
REVISION. OK TO DRY IN STRUCTURE
INSPECTION RESULTS Page
MASON COUNTY Department of Community Development
COMMUNITY DEVELOPMENT 615 W Alder St, Shelton,WA 98584
Permit Assistance tenter;Budding,Plammng (360) 427-9670 ext. 352
Application # BLD2024-00016 Application Type ADDITION OR REMODEL- Owner MILLER RONALD F
RESIDENTIAL
Parcel# 320225000901 Site Address 297 SE Bayview Rd Shelton, WA 98584
Inspector Inspection Type Date Status Comments
12-12-24 DED
1)Drywall on garage side to extend all the way up to bottom of roof sheeting for fire
separation.
Dave Dobson BLD-FINAL INSPECTION 12/12/2024 FAIL 2)house/garage door to be self latching
29 exterior siding to be completed around main entry door
holes to be covered at electrical box locations
ve those end of cut off soffit at house/entry junction
cap end of gutter near front entry.
INSPECTION RESULTS Pagel
MASON COUNTY Department of Community Development
COMMUNITY DEVELOPMENT 615 W Alder St, Shelton, WA 98584
Pefrrut Assistance Centel,Budding,Planning (360) 427-9670 ext. 352
Application# BLD2024-00016 Application Type ADDITION OR REMODEL- Owner MILLER RONALD F
RESIDENTIAL
Parcel # 320225000901 Site Address 297 SE Bayview Rd Shelton, WA 98584
Inspector Inspection Type Date Status Comments
2-13-25 DED
Per previous correction, drywall on the house/garage wall is to extend all the way
up to the bottom of roof sheeting for fire separation.All penetrations to be
caulked/sealed. (IRC R302)
SEAMS DO NOT REQUIRE MUD/TAPE IF THEY LAND DIRECTLY OVER A
d FRAMING MEMBER.
Soffits to be fully enclosed. Soffits above entry, to the left, are open.
Dave Dobson BLD-FINAL INSPECTION 02/13/2025 FAIL 3/�iouse/garage door to be self closing and self latching
12-12-24 DED
1)Drywall on garage side to extend all the way up to bottom of roof sheeting for fire
separation.
2)house/garage door to be self latching
3)exterior siding to be completed around main entry door
4)holes to be covered at electrical box locations
5)enclose end of cut off soffit at house/entry junction
6)cap end of gutter near front entry.
Mason County
Mason County - Division of Community Development
615 W.Alder St.
Building 8
Shelton, WA 98584
360427-9670 ext 352
www.masoncountywa.gov
FANODJRE
4-00016 ADDITION OR REMODEL-
RESIDENTIAL
ESCRIPTION: ADDITION, CONVERT TO HEATED SPACE ISSUED: 03/19/2024
DEL
ESS: 297 SE BAYVIEW RD SHELTON EXPIRES: 09/15/2024
PARCEL: 320225000901
APPLICANT: MILLER RONALD F OWNER: MILLER RONALD F
297 SE BAYVIEW RD 297 SE BAYVIEW RD
SHELTON,WA 98584 SHELTON,WA 98584
608-209-2132
ARCHITECT: BOYER SCOTT
12216 CORLISS AVE N
SEATTLE,WA 98133
206-235-0935
GENERAL CONTRACTOR'S LICENSE: NW BUILDERS& RENOVATION License: NWBUIBR813NK
3238 SOUTH 150TH ST Expires: 08/12/2025
SEATAC,WA 98188
253-433-1478
VALUATIONS: FEES: Paid Due
R-3 VB Residential, one- 412.00 $68,424.96 Mechanical Base Fee $30.00 $0.00
and two-family Plumbing Fees $9.00 $0.00
Planning Review Fee $240.00 $0.00
State Fee-Residential $6.50 $0.00
Change in Tenant- Minor EH $135.00 $0.00
Plan Review
Mechanical Fees $38.00 $0.00
Plan Check Fee $445.84 $0.00
Building Permit Fee $685.90 $0.00
Plumbing Base Fee $25.00 $0.00
Technology Surcharge $24.67 $0.00
Total: $68,424.96 Totals : $1,639.91 $0.00
FIXTURES
Printed by:Anna Schaffran on:03/19/2024 02:02 PM
Page 1 of 7
Mason County
Mason County - Division of Community Development
615 W. Alder St.
Building 8
Shelton, WA 98584
360-427-9670 ext 352
www.masoncoun"a.gov
ADDITION OR REMODEL- RESIDENTIAL BLD2024-00016
Qty Mechanical Fixtures City Plumbing Fixtures
1.0000 Furnace(s) 1.0000 Number of Water Heaters and or Vent
1.0000 Heat Pump(s)
REQUIRED INSPECTIONS
Setback Inspection Framing Inspection
Footing Inspection Rough- Plumbing Inspection
Foundation Wall-Pre-Pour Inspection Mechanical Inspection
Underfloor Inspection Insulation Inspection
Shearwall Inspection BLD-Final Inspection
CONDITIONS
Concrete used for basement walls, foundation walls, exterior walls, porches, carport slabs, steps exposed to the weather,
garage floor slabs and other vertical concrete work exposed to the weather shall have a minimum compressive strength of
3000 psi (IRC Table R402.2).
" Carbon monoxide alarms, listed as complying with UL 2075 shall be installed in accordance with manufacturer
specifications and in accordance with IRC Section R315.
Alarms shall be installed outside of each separate sleeping area in the immediate vicinity of the bedrooms and on each level
of the dwelling.
EXISTING DWELLINGS shall be equipped with carbon monoxide alarms when alterations (including addition or alteration of
fuel burning appliances), repairs, or additions requiring a permit occur, or when one or more sleeping rooms are added or
created.
Printed by:Anna Schaffran on:03/19/2024 02:02 PM
Page 2 of 7
Mason County
Mason County - Division of Community Development
615 W. Alder St.
Building 8
Shelton, WA 98584
360-427-9670 ext 352
www.masoncountywa.gov
ADDITION OR REMODEL- RESIDENTIAL BLD2024-00016
* A permanent certificate, completed by the builder or registered design professional, shall be posted on a wall in the space
where the furnace is located, a utility room, or an approved location inside the building. When located on the elctrical panel,
the certificate shall not cover or obstruct the visibility of the circuit directory label, service disconnect labek, or toher reqyired
Iabels.The certificate shall list the predominant R-values of insulation installed in or on ceiling/roof, walls, foundation (slab,
basement wall, crawlspace wall and/or floor),and ducts outside the conditioned spaces; U-factors for fenestration; and the
solar heat gain coefficient(SHGC)of fenestration. Where there is more than one value for each component, the certificate
shall list the value covering the largest area. The certificate shall list the type and efficiency of heating, cooling, and service
water heating equipment, duct leakage rates including test conditions as specified in WSEC Chapter 4, and air leakage
results if a blower door test was conducted.
Building envelope air leakage control shall be considered acceptable when tested to have an air leakage less than 5 air
changes per hour when tested with a blower door in accordanve with WSEC Section R402.4.1.2.
The blower door test results shall be recorded on the permanent certificate required located near the electrical distribution
panel. Air leakage testing is not required for additions less than 500 square feet. Reference WSEC R402.4.1.2.
Compliance certificates are available online at the WSU Energy program website titled, "WSEC 2015 Certificate"and are
available in or'/z sheets.
* By definition, propane tanks and heatpumps are structures,which must meet setback conditions. Please check your
"Approved Site Plan"to ensure these structures meet the setback conditions listed.
* The stamped approved site plan is required to be on-site for inspection purposes. If an inspection is requested and the
approved site plan is not on site, approval will not be granted. In addition, a re-inspection fee (refer to current fee schedule,
minimum 1 hour)will be charged and shall be collected by the Building Department prior to any further inspections being
performed or approvals granted.
* The plan review check list and corrections are part of the approved plans and must remain attached. It is the responsibility
of the applicant, owner or contractor to make the required corrections indicated on the plans. Once the plans are marked
"APPROVED", they shall not be changed or altered without authorization from the Building Official. The permit holder is
responsible to retain the complete approved set of plans on site for the duration of the project. Failure to comply and/or
removal of approved documents will result in failure of required building inspections.
* OWNER/ BUILDER acknowledges submission of inaccurate information may result in a stop work order or permit
revocation.Acknowledgement of such is by signature below. I declare that I am the owner, owners legal representative, or
contractor. I further declare that I am entitled to receive this permit and to do the work as proposed. I have obtained
permission from all the necessary parties, including any easement holder or parties of interest regarding this project. The
owner or authorized agent represents that the information provided is accurate and grants employees of Mason County
access to the above described property and structure(s)for review and inspection. This permit/application becomes null &
void if work or authorized construction is not commenced within 180 days or if construction work is suspended for a period of
180 days. PROOF OF CONTINUATION OF WORK IS BY MEANS OF INSPECTION. INACTIVITY OF THIS PERMIT
APPLICATION OF 180 DAYS WILL INVALIDATE THE APPLICATION.
* Approved per dimensions and setbacks on submitted site plan. Setbacks are measured from the furthest projection of the
structure.
* CONSTRUCTION PROCESS TO BE FIELD CORRECTED AS REQUIRED PER MASON COUNTY BUILDING
DEPARTMENT AND THE ADOPTED BUILDING CODE.
The construction of the permitted project is subject to inspections by the Mason County Building Department. All
construction must be in conformance with the international codes as amended and adopted by Mason County. Any
corrections, changes or alterations required by a Mason County Building Inspector shall be made prior to requesting
additional inspections.
* All property lines shall be clearly identified at the time of foundation inspection.
Printed by:Anna Schaffran on:03/19/2024 02:02 PM
Page 3 of 7
Mason County
Mason County - Division of Community Development
615 W. Alder St.
Building 8
Shelton, WA 98584
360-427-9670 ext 352
www.masoncountywa.gov
ADDITION OR REMODEL- RESIDENTIAL BLD2024-00016
* Pressure treated wood manufactured after January 1, 2004 may contain high concentrations of copper which could quickly
corrode metal fasteners, connectors, and flashing. Install metal connectors approved for contact with the new types of
pressure treated material.
* All permits expire 180 days after permit issuance, or 180 days after the last inspection activity is performed. The Building
Official may grant a one time extention of 180 days, upon the receipt of a written extension request prior to permit expiration.
Letter must indicating that circumstances beyond the control of the permit holder preventing action from being taken. No
more than one extension may be granted.
* All changes to "approved" building plans that effect compliance with the international codes as amended and adopted, or
any other Mason County ordinance or regulation, must be reviewed and approved by Mason County prior to construction.
* The international code requires a fire apparatus access road for every facility, building, or portion of a building that is more
than 150'from an approved access road. Roads are required to meet the minimum Mason County Fire Marshal standards
for Fire Apparatus Access Roads up to the point where such roads connect with a county maintained public road or to
another fire apparatus access road which connects to a county maintained public road.
* Provisions for surface/subsurface drainage control must be implemented with new construction or development on site and
MUST NOT adversely impact adjacent parcels. Under the requirements of Mason County Stormwater Ordinance, either
private ditches and drains will meet requirements of the stormwater ordinance or prior approval will be granted to use an
existing utility and drainage easement dedicated for that specific purpose. For further information regarding this ordinance
contact the Mason County Public Works Department prior to construction at Ext 450
* Concrete encased grounding electrodes must be installed and used at each new building or structure that is built upon a
permanent concrete foundation. In Mason County the electrical code is regulated by Washington State Department of Labor
& Industries(L&I).
For more information contact L&I for additional information. In Olympia call (360)902-6350 and in Bremerton call (360)415-
4000.
* WIND LOADS- Roof coverings shall be designed and tested to withstand the maximum basic wind speed. The basic
wind speed for Mason County is 85 MPH.
* The foundation/footing must be placed on undisturbed, firm-native soil. Proper frost depth shall be observed below grade
in undisturbed soils.
* All construction must meet or exceed all local and state ordinances in addition to the International Codes requirements as
adopted and amended by Mason County and the State of Washington. Occupancy is limited to the approved and permitted
classification. Any non-approved change of use or occupancy would result in permit revocation.
* Contractor registration laws are governed under RCW 18.27 and enforced by the WA State Dept of Labor and Industries,
Contractor Compliance Division. There are potential risks and monetary liabilities to the homeowner for using an
unregistered contractor. Further information can be obtained at 1-800-647-0982. The person signing this condition is either
the homeowner, agent for the owner or a registered contractor according to WA state law.
* All building permits shall have a final inspection performed and approved by Mason County Building Department prior to
permit expiration. The failure to request a final inspection or to obtain approval will be documented in the legal property
records on file with Mason County as being non-compliant with Mason County ordinances and building regulations.
* Retaining walls needed to support a surcharge such as structures, roads, or to support slopes, shall require a separate
building permit and approval prior to construction of the retaining wall.
Printed by:Anna Schaffran on:03/19/2024 02:02 PM
Page 4 of 7
Mason County
Mason County - Division of Community Development
615 W.Alder St.
Building 8
Shelton, WA 98584
360-427-9670 ext 352
www.masoncountywa.gov
ADDITION OR REMODEL- RESIDENTIAL BLD2024-00016
A Mason County Stormwater Management Worksheet was completed and signed as part of this building permit
application. Design, sizing, placement, inspection and maintenance of stormwater management systems shall be the
responsibility of the owner/agent of the developed parcel. It is the owner/agent/contractor's responsibility to ensure that
Mason County Department of Public Works has approved the stormwater site plan for this parcel prior to the commencement
of any development activities. "NOTE if Stormwater Management option "A"was selected on the Small Parcel Stormwater
Management Application/Worksheet the document entitled "Managing Storm Drainage on Small Lots, The Small Parcel
Stormwater Site Plan" constitutes an approved plan based on the criteria listed on the application/worksheet. If the
development has, or will have, a septic/drainfield system you are responsible for contacting Mason County Division of
Environmental Health to ensure that the stormwater system will not adversely affect the septic system of this, or any other,
parcel. You may also wish to consult with the septic design professional involved with the project. By calling for a final
inspection of the building permit the owner/agent/contractor is acknowledging that all components of the stormwater
management system have been installed as approved on the stormwater site plan. Under the requirements of Mason County
Stormwater Ordinance, either private ditches and drains will meet requirements of the stormwater ordinance or prior
approval will be granted to use an existing utility and drainage easement dedicated for that specific purpose.
" A minimum of 90 percent of all permanently installed lamps in lighting fixtures shall be high efficacy lamps in accordance
with IECC/WSEC Section R404.1.
" Landings and stairs must meet the same setback conditions as any permitted structure; and, must be shown on your site
plan. Please check your"Approved Site Plan"to ensure these structures are shown and meet the setback conditions listed.
REQUIREMENTS FOR ROOF COVERINGS. Roof coverings shall be applied in accordance with the applicable
provisions of the current code and the manufacturer's installation instructions.
A drip edge shall be provided at eaves and gables of shingle roofs.
* All surface water and potential runoff must be controlled on site and shall not adversely affect any adjacent properties nor
increase the velocity flow entering or abutting to any state or county culverting/d itch ing system or road way.
" Owner/Agent is responsible to post the assigned address and/or purchase and post private road signs in accordance
with Mason County Title 14.28 and 14.17.
Before renovating or remodeling activities in pre-1978 residential buildings or child occupied facilities and to ensure your
compliance with applicable Washington lead regulations, contact the WA State Department of Commerce Lead Paint
Program at; (360)586-5323 or email Ibpinfo@commerce.wa.gov. Visit www.commerce.wa.gov/lead for further information.
All RED stamped approved plans are required to be on-site for inspection purposes. If an inspection is called for and
plans are not available on site, then approval will not be granted. In addition, a re-inspection fee(refer to current fee
schedule, minimum 1 hour)will be charged and must be collected by the Building Department prior to any further inspections
being performed or approvals granted.
Printed by:Anna Schaffran on:03/19/2024 02:02 PM
Page 5 of 7
Mason County
Mason County - Division of Community Development
615 W.Alder St.
Building 8
Shelton, WA 98584
360-427-9670 ext 352
www.masoncountywa.gov
ADDITION OR REMODEL- RESIDENTIAL BLD2024-00016
Installation of heating equipment in a single-family residence shall meet the requirements of the current WSEC R403,
applicable sections of the IRC, and IMC.
Heating equipment shall be sized in accordance to ICC/WSEC, Section R403.7. Heating and design load calculations for the
purpose of sizing HVAC systems are required and shall be calculated in accordance with accepted practice, including
infiltration and ventilation. Design calculations shall be available for inspection during inspection.
Referencing IRC M1601.4, all ducts, air handlers, filter boxes, and building cavities shall be sealed. All joints of duct
systems and seams shall be made substantially air tight by means of tapes, mastics, liquid sealants, gasketing or other
approved closure systems. Closure systems used with rigid fibrous glass ducts shall comply with UL181A and shall be
marked 181 A-P for pressure-sensitive tape, 181 A-M for mastic or 181 A-H for heat-sensitive tape. Closure systems used
with flexible air ducts and flexible air connectors shall comply with UL181 B and shall be marked 181 B-FX for pressure-
sensitive tape or 181 B-M for mastic. Duct connections to flanges of air distribution system equipment or sheet metal fittings
shall be mechanically fastened. Mechanical fasteners for use with flexible nonmetallic air ducts shall comply with UL 181 B
and shall be marked 181 B-C. Crimp joints for round metal ducts shall have a contact lap of at least 1-112 inches (38 mm)
and shall be mechanically fastened by means of at least three sheet-metal screws or rivets equally spaced around the joint.
Closure systems used to seal metal ductwork shall be installed in accordance with the manufacturer's installation
instructions.
Duct tape is NOT permitted as a sealant on any ducts. When ducts are located in unheated spaces the ducts hall be
insulated to R-8
DUCT TIGHTNESS TESTING shall be conducted by person(s)trained to perform such testing. A signed affidavit
documenting test results in accordance to IECC/WSEC Section R403.3.3 shall be provided to the Mason County Building
Department prior to the final occupancy inspection. Affidavit forms are available on at the WSU-Energy Program website
titles, "Duct Leakage Affidavit"or"Duct Leakage Testing Results(Existing Construction)." Duct tightness testing is not
required if the air handler and all ducts are located within the heated space.
" The use, handling and storage of hazardous materials or flammable and combustible liquids in excess of 10 gallons is not
allowed without the approval of the Mason County Fire Marshal.
Adopted Washington State Energy Code Compliance has been approved as follows:
Heat Type: Electric or other than electric, Compliance Method: Prescriptive option Marine-4C, Window(Max U-
Factor):0.30, Skylight(Max U-Factor):0.50, Doors (Type/Max U-Factor):0.30 or less, Wall insulation R-21, Floor insulation
R-30, Ceiling Insulation min. R-49,Vault Insulation R-38, and Slab Insulation R-10.
Fuel Normalization Credits: Table 406.2
5 All other heating systems
Table 406.3—Energy Credits (Single Family)
1.3 Prescriptive compliance is based on Table R402.1.1 with the following modifications:
Vertical fenestration U = 0.28, Floor R-38, Slab on grade R-10 perimeter and under entire slab below grade slab R-10
perimeter and under entire slab or Compliance based on Section R402.1.4: Reduce the Total conductive UA by 5%
5.5 Water heating system shall include one of the following: Electric heat pump water heater meeting the standards for Tier
III of NEEA's advanced water heating specification or For R-2 Occupancy, electric heat pump water heater(s), meeting the
standards for Tier III of NEEA's advanced water heating specification, shall supply domestic hot water to all units. If one
water heater is serving more than one dwelling unit, all hot water supply and recirculation piping shall be insulated with R-8
minimum pipe insulation.
Printed by:Anna Schaffran on:03/19/2024 02:02 PM
Page 6 of 7
Mason County
<1
Mason County - Division of Community Development
615 W.Alder St.
Building 8
Shelton, WA 98584
360-427-9670 ext 352
www.masoncountywa.gov
ADDITION OR REMODEL- RESIDENTIAL BLD2024-00016
" Site plan changes are subject to review and approval by the planning department. Development is subject to
Environmental Health setbacks.All setbacks are measured form the furthest projection of a structure.
* Any changes in proposed construction shall be reviewed by the engineer or architect of record and submitted in writing to
the Mason County Building Department prior to construction. All engineering and/or architectural documents are a part of
the approved set of plans and shall remain attached thereto. If documents are removed, approval will not be granted. In
addition, a re-inspection fee (refer to current fee schedule, minimum 1 hour)will be charged and shall be collected by the
Building Department prior to any further inspections being performed or approvals granted.
* A separate inspection in addition to the inspections required in the IBC, Section 110 shall be required in accordance with
the 2018 IBC, Section 1705.12.2 and Section 1707.1. The additional inspection is required when shear wall fastener
spacing is required to be 4 inches or less. The shear wall schedule shown on sheet A 5.03 designate ALL WALLS with
fastener spacing 4 inches or less.
The required inspection may be performed by the Mason County Building Department, a WABO certified inspector, certified
to inspect lateral connections, the Engineer of record (EOR), or an authorized representative of the (EOR). The special
inspectors duties and responsibilities shall be as specified in Chapter 17. When a third party inspector is used to perform the
inspection, special inspection reports shall be submitted to the Mason County Building Department, 615 W Alder St, Shelton,
WA 98584 and also available on site for review by the Building Official. Inspection reports shall be completed and submitted
to the Mason County Building Department in a timely manner and shall be submitted prior to the framing inspection of said
project.
* Applicant/Owner assumes all responsibility if On-site Sewage Components are encumbered.
A.) Drainfield/Reserve requires a 1 Oft setback from all footing/foundations.
B.)Septic tank(s) requires 5ft setback from all footing/foundations.
C.) No foundation/ Perimeter Drains within 30ft, down gradient of Drainfield/Reserve area.
D.) No Cut Bank(s)(greater than 5ft and over 45 degrees)within 50ft, down gradient of Drainfield/ Reserve area.
* NO NEW DEVELOPMENT WATER-WARD OF EXISTING STRUCTURE OUTLINED IN RED ON SITE PLAN.
*all changes are subject to review and approval
*subject to EH setbacks
I hereby certify that I have read and examined this application and know the same to be true and correct.
All provisions of Laws and Ordinances governing this type of work will be complied with whether
specified herein or not. The granting of a permit does not presume to give authority to violate or cancel
the provisions of any other state/local law regulating construction or the performance of construction.
Issued By: Anno S
Contractor or Authorized Agent: Date: 1
Printed by:Anna Schaffran on:03/19/2024 02:02 PM
Page 7 of 7