HomeMy WebLinkAboutBLD2008-01127 Cancelled MFG Home - BLD Permit / Conditions - 11/4/2011 Inspection Line(360)427-7262
MASON COUNTY DEPT. OF COMMUNITY DEVELOPMENT Phone: (360)427-9670, ext. 352
Mason County Bldg. III 426 W. Cedar P.O. Box 186
Not$ Shelton, WA 98584
RESIDENTIAL BUILDING PERMIT BLD2008-01127
OWNER: KELLY ROHR RECEIVED: 9/5/2008
CONTRACTOR: LICENSE: EXP: ISSUED: 5/4/2011
SITE ADDRESS: 431 NE SCHOONER LOOP BELFAIR EXPIRES: 1 1/412 0 1 1
PARCEL NUMBER: 123305100046
LEGAL DESCRIPTION: BEARDS COVE DIV 4 LOT: 46
PROJECT DESCRIPTION: DIRECTIONS TO SITE:
Replace Manufatured Home Beards Cove
General Information Construction &Occupancy Infor(h4tionj I Square Footage Information
No. of Bedrooms: 2 Type of Cons .: VB
Type of Use: MH Insp.Area: No. of Bathrooms: 2 Occ. Gro p: R3 of Size: Deck:
Type of Work: NEW Fire Dist.: 2 No.of Stories: 1 Occ. Lo Building:
Valuation: Building Height: Occ. tatu Prim asement:
Manufactured Home Informatio Setback lnfqmkloo X Shoreline&Planning Information
Make:Kingswood Length: 44 Ft. Front: W 25.0 t relin Ft. Water Body: None
Re E 3 . Ft I e: Ft. SEPA?: No
Model:Guerdon Width: 27 Ft. Sid 1: N 0 Ft Shoreline Desig.: Not Applicable
Year:1992 Serial No.: 12 29A86 Si 2: 0 Ft. 2 Comp. Plan Desig.: Rural
Plumbing Fixtures ec an cal Fixtures FEES
Type i Qty. T e Qty. Type By Date Amount Receipt
Mobile Home Submittal Fee KKK 9/5/2008 $247.00 S220080001
EH Plan Review KKK 9/5/2008 $40.00 S220080001
Planning Review Fee KKK 9/5/2008 $190.00 S22008000i
Mobile Home Issuance Fee MAL 9/9/2008 $247.00 S1 201 1 0001
Total $724.00
BLD2008-01127 Please refer to the following pages for conditions of this permit. Page 1 of 6
CASE NOTES FOR
BLD2008-01127
CONDITIONS FOR
BLD2008-01127
1) Contractor registration laws are governed under RCW 18.27 and enforced by the WA State Dept of Labor and Industries, Contractor Compliance Division.
There are potential risks and monetary liabilities to the homeowner for using an unregistered contractor. Further information can be obtained at
1-800-647-098 a person signing this condition is either the homeowner, agent for the owner or a registered contractor according to WA state law.
X
2) Apprmensions and setbacks on site plan submitted on April 12, 2011. Setbacks are measured from the furthest projection of the structure.
X ov r di
3) All approved plans are required to be on-site for inspection purposes. If an inspection is called for and plans are not available on site, then approval will
not be granted. In addition, a re-inspection fee (refer to current fee schedule, minimum 1 hour)will be charged and must be collected by the Building
Depa�t prior to any further inspections being performed or approvals granted.
X
4) OwnerV t is responsible to post the assigned address and/or purchase and post private road signs in accordance with Mason County Title 14.28.
X
5) The plan review check list and corrections are part of the approved plans and must remain thereto. It is the responsibility of the applicant to make the
corrections indicated on the plans. Once the plans are marked "APPROVED", they shall not be changed or altered without authorization from the Building
Official. The permit holder is responsible to retain the complete approved set of plans on site for the duration of the project. Failure to comply and/or
removal approved documents will result in failure of required building inspections.
X
6) THE FOUNDATION SYSTEM SHALL BE PLACED ON UNDISTURBED, NATIVE SOIL. X
7) The"approved" site plan is required to be on-site for inspection purposes. If an inspection is requested and the"approved" site plan is not on site, then
approval will not be granted. In addition, a re-inspection fee (refer to current fee schedule, minimum 1 hour)will be charged and shall be collected by the
Building Department prior to any further inspections being performed or approvals granted.
X
BLD2008-01127 Please refer to the following pages for conditions of this permit. Page 2 of 6
-6) Any retailer, manufacturer or contractor who installs a manufactured home warrants that the manufactured home is installed in accordance with the State
Installation code, chapter 296-150M WAC. All installers hired to do installation work shall be certified manufactured home installers and shall be present
to supervise the installation of all on-site work. An Installer Tag shall be posted on site giving the certification number and signature of the certified
installer responsible for each major part of the installation. RCW43-63B.090
An approved Installer cerification tag shall be placed on the,end of the manufactured home directly above or below the HUD certification tag or temporarily
located in plain site within three of the home's front entry. There shall be one certification tag for each certified installer accounting for the work that each
installer perform stalled. certification number and signature of the certified installer responsible for each major part of the installation.
WAC365-210 x� �
9) If you are installing a manufacturing home and no longer have the installation manual for the home, you must use the instructions of the American
National Standards Institute (ANSI). To order the ANSI instructions you may either get an order form from the Mason County Building Department or you
can c t the Offfice of Manufacturing Housing (360) 725-2800.
X
10) Per 2003 IRC -SECTION 1609-WIND LOADS - 1609.1 Applications. Buildings, structures and parts thereof shall be designed to withstand the
minimum wind loads prescribed herein. Decreases in wind load shall not be made for the effect of shielding by other structures. Per FIGURE 1609
BASIC AND SPEED (3-SECOND GUST)the wind speed for Mason County is 85 MPH.
X
11) Per IRC - SECTION R905-REQUIREMENTS FOR ROOF COVERINGS- R905.1 Roof covering application. Roof coverings shall be applied in
acco die with the applicable provisions of this section and the manufacturer's installation instructions.
X �JI/
12) All construction must meet or exceed all local ordinances and the international codes requirements as adopted and amended by Mason County and the
State of Washington. Occupancy is limited to the approved and permitted classification. Any non-approved change of use or occupancy would result in
per mi r ation.
X
13) Lake Cushman area is designated with a 551b snow load rating. The owner/agent of this permit acknowledges that if the unit permitted under this permit
does et the recommended snow load rating, there is a potential for failure due to weight accumulation beyond that of the design criteria.
X
14) REQUIRED INSPECTIONS (Footing Inspection-prior to pour, Set-up Inspection-prior to skirting, Final Inspection-prior to occupancy). I hereby assume all
responsibility for the scheduling of my required inspections. If the required inspections are not requested, inspected and signed off(approved) by the
inspector in the prescribed order, I understand that reinspection fees and an hourly investigation fee pursuant to the current fees adopted by the Mason
County Building Dept., and will be assessed in addition to my original permit fees to resolve any questionable practices or problems that have been
discovered. I further understand that this investigation will be scheduled time allows. Until resolution of any/all problems no occupancy (Final
Inspection)will be granted for the residence.
OWNER/CONTRACTOR(indicate which) Signature X
15) Applicant has indicated this is a replacement unit. Prior to Mason County allowing any occupnacy of the new proposed unit, the existing unit which is
on-site and is being replaced MUST be removed from the parcel. X
IF
BLD2008-01127 Please refer to the following pages for conditions of this permit. Page 3 of 6
N6) This permit is being issued to the applicant to allow the moving of this mobile home onto his/her private property to perform the necessary corrections to
this unit to bring it into compliance with HUD Standards, and get the unit recertified by the State of Washington Department of Labor and Industries. This
unit is not to be occupied. No utilities are to be connected. No permanent set up is to begin. This permit is valid for sixty(60)days only. No extensions
will be granted. Any violation of the conditions of this permit or the denial of a permanent installation permit will result in the determination that the unit
must be rem,o e r m the property at the expense of the owner.
X
17) This permit is for th acement and installation of the manufactured home only and does not imply approval or review for any other items indidcated on
the plot plan. _
18) Permanent Address must be posted and visible from the road
Deck must be safe and meet code for year building permit was issued. Rebuilt decks are required to meet current code. All guardrails and handrails
must be in good condition and meet code for year built or current code if replaced.
Skirting must be vented 1:150 and backfill sloped away from unit 2% for a minimum of 5' around the perimeter of the unit
Gutters and downspouts must be installed with splash blocks provided
All exterior penetrations must be sealed
HWT Pressure relief line and dryer vent must exit skirting a minimum of 6"with a maximum of 24" above grade.
The unit shall have a minimum of 16"x24"crawl space access provided HOWEVER, if the unit has not received a set up inspection and is skirted, 4
panels centrally located (one on each side of unit) shall be removed by the owner/applicant prior to requesting the inspection.
All conditions on the original or issued permit must be met
If the unit was installed by a WAINS certified installer/contractor since July 1, 2003, CTED Installer Tags must be available
It shall be the responsibility of the person requesting the inspection to provide the
manufacturer specifications, ANSI Standards or approved engineered design for the installation of the unit and have them available on site for inspection.
Each inspection required will be assessed a fee as adopted under Mason County current fee schedule. Re-Inspection fees will be assessed each time an
inspection is requested and required items are not completed prior to the inspection being performed
ENFORCEMENT PROVISION:
Any manufactured/mobile home and/or appurtenant structures found non-compliant with any county or state regulation are subject to enforcement action
and subsequent violation and penalties pursuant to the Mason County Code.
X
BLD2008-01127 Please refer to the following pages for conditions of this permit. Page 4 of 6
.19) Provisions for surface/subsurface drainage control must be implemented with new construction or development on site and MUST NOT adversely impact
adjacent parcels. Under the requirements of Mason County Stormwater Ordinance, either private ditches and drains will meet requirements of the
stormwater ordinance or prior approval will be granted to use an existing utility and drainage easement dedicated for that specific purpose. For further
information regarding this ordinance and the REQUIREMENT to obtain an ACCESS PERMIT for the installation/construction of a driveway or access
connecting from a Mason County Road, Contact the Mason County Public Works Department prior to construction at Ext 450. For any construction which
is proposed to be located within 25'of a Mason County road right of way, it is suggested to contact that office to review future planned work which may
affect your pro
X
20) Pla t of structure must comply with standards set forth per the international codes regarding descending and/or ascending slopes.
X
21) All changes to "approved" building plans that effect compliance with the international codes as amended and adopted, or any other Mason County
ord'�r regulation, must be reviewed and approved by Mason County prior to construction.
X
22) CONSTRUCTION PROCESS TO BE FIELD CORRECTED AS REQUIRED PER MASON COUNTY BUILDING DEPARTMENT AND THE ADOPTED
BUILDING CODE.
The construction of the permitted project is subject to inspections by the Mason County Building Department. All construction must be in conformance
with the international codes as amended and adopted by Mason County. Any corrections, changes or alterations required by a Mason County Building
In r shall be made prior to requesting additional inspections.
X
23) The installation permit shall be displayed in clear view of the site access road. The approved site plan and other applicable instructions, including
installation instructions, shall be available in this location OR placed in the location specified by WAC 296-150M-655. Support configuration shall be
cl V
rked in the installation instructions.
X:
24) All property lines shall be clearly identified at the time of foundation inspection.,X�--
25) All building permits shall have a final inspection performed and approved by the Mason County Building Department prior to permit expiration. The failure
to request a final inspection or to obtain approval will be documented in the legal property records on file with Mason County as being non-compliant with
Mas my ordinances and building regulations.
X
26) All permits expire 180 days after permit issuance, or 180 days after the last inspection activity is performed. The Building Official may extend the time for
action for a period not exceeding 180 days, upon the receipt of a written extension request indicating that circumstances beyond the control of the permit
rve prevented action from being taken. No more than one extension may be granted.
X
27) Pressure treated wood manufactured after January 1, 2004 may contain high concentrations of copper which could quickly corrode metal fasteners,
con ors, d flashing. Install metal connectors approved for contact with the new types of pressure treated material.
X
BLD2008-01127 Please refer to the following pages for conditions of this permit. Page 5 of 6
28) Wate lit i not to be degraded to the detriment of the aquatic environment as a result of this project.
X
29) Prior to final approval, all upland areas disturbed or newly ed by construction activities shall be seeded, vegetated or given an equivalent type of
erosion protection (silt fencing or straw matting). X
30) Temporary erosion control measures must be implemented to prevent water quality degradation of adjacent waters or wetlands. Silt fencing must be
installed and maintained until upland vegetation has become established. X.OF I&n
31) All other necessary permits from Mason County, Washington State and/or Federal Agencies that are required for this proposed development and
construction must be obtained PRIOR TO SAME DEVELOPMENT AND CONSTRUCTION. X Aig
32) All Best Management Practices must be strictly adhered to throughout the proposed development.XAL ,—
33) The international code requires a fire apparatus access road for every facility, building, or portion of a building that is more than 150' from an approved
access road. Roads are required to meet the minimum Mason County Fire Marshal standards for Fire Apparatus Access Roads up to the point where
such roads connect with a county maintained public road or to another fire apparatus access road which connects to a county maintained public road.
X
34) All construction and demolition debris must be removed from the site after project completion. Pr er disposal of construction debris must be on land in
such a manner that debris cannot enter or cause water quality degradation of State waters. X ZZ ---
This permit becomes null and void if work or construction authorized is not commenced within 180 days, or if construction or work is suspended for a period of 180 days at any
time after work is commenced. Evidence of continuation of work is a progress inspection within the 180 day period. Final inspection must be approved before building can be
occupied. Proof of continuation of work is by means of a progress inspection.The owner or the agent on the owners behalf, represents that the information provided is accurate
and grants employees of Mason County access";, ve OesG44ed property and structure for revi w a9d inspection.
OWNER O AG DATE: �(
BLD2008-01127 Please refer to the following pages for conditions of this permit. Page 6 of 6
o CONCRETE MECHANICAL MANUFACTURED HOME
o Date By
C) Footings I Setbacks Gas Piping Ribbons
C) Interior Date By interior-Date By Date By
vFxterfor Date By Exterior-Date B Set-up r
Point Load/isolated Footings INSULATION Date By <
BG I SLAB INSULATION --
Date By Data By FIRE DEPARTMENT
Foundation Walls Floors Date By
Date By Data By DECKS
FRAMING Walls Date By
Date By Data By PROPANE TANKS
PLUMBING vault Data By
Date By OTHER
Groundwork Attic
Date By Type.
Date By Date By
a.W.'V DRYWALL Type-
Date
Brace Wall Date By 03
Date By Date By r
v
FINAL INSPECTION
CDWater Line Fire Seperation
CD
m Date By Date By Date �By p
m 00
o Pass or Request Inspect. c
Type of Insp. Fail Date Date Done By CommentsCD N
0
s
v
U)
0
0
0
a
oCA
CA
0
CD
1
3
_U
W
CD
0
s
FILL
-BltD
� 23 31 O
C� S CR 0 /aa
10
COPY , 104
6�ro�� Pra
THESE PLANS MUST BE
ON THE JOB SITE
FOR INSPECTION.
CHANGESAPPROVAL
SUBMIT CHANGES FOR
PRIOR TO PERFORMING WORK
MUST MEET ALL CURRENT
WASHINGTON STATE CODES
V ENT �
AT 1 Sq Ft Per 150 SO
F_
APPROVE®
MASON BUILDING INSPECTOR
CHANGES SUBJECT TO PPP4VAVAL
RAJ i nATC IVA�
f) vnA-s&fC��J
o v - e�
bs
VENT � -TWC�t �JG�,eSS
AT 1 Sq Ft Per 150 Sq _
MUST MEET ALL CURRENT
WASHINGTON STATE CODES
VANITY � /H �� ❑❑ L
0
P BEDROOM 7DININGg 10' "LINEN
sLL.L 14 1 1 1 1 11
wL -
A PAN R
a LMN ----- L--,
i
CATHEDRAL THRU-OUT
_ R i OPT
MAM LINEN wPLE G/C 11
BEDROOM DOORS LMNG ROOM
Na 9 D0 7 �yy 2a'
1 1QDE'-N6W
p�LE
RID
--t
¢ 6327CT14828(1,296 SQ.FT.)2EEDROOM.2BATHS-CATHED THRU-OUT OFT
-ors
THESE PLAN-S-MUST-BE-
SUBMIT CHANGES FOR APPROVAL ON THE JOB BITE
PRIOR TO PERFORMING WORK
FOR INSPECTION.
MUST MEET ALL CURRENT
WASHINGTON STATE CODES
`SEA
r. MASON COUNTY
BUMDING
ParcP 1 �
e11' R� ��r- Iz330- s-i-cr�aV6
q7 U; <;n� Ave 44� 5 arJdc-eSS y3 ( /-�/F
�cS bo r U/A , 9g3�� S�lr�n�r l/�, Pel
CfD
5c.b000er, 1p RG1
317
ti
y
,p
W
T r✓1 ct flu f4, turet4
Z7� Nome
16�A&4 ZO
5r �O m.n
33, Vk I n �'e j j BUMDING
30
RECEIVED
SEP 0 5 2008
MASON COUNTY
MA COUNTY RESIDENTIAL PLANS SUBMITTAL CHECKLIST
O1wner's Name: I I h a--) Date: -S-Q� Reviewed B
llocuments:
Building permit application complete STORM WAT O HEET COMPLETE
Planning intake checklist complete C�.b'�-P .�-
XSite plan includes allowable building area,roof overhands,decks, etc.
Fire apparatus access road info required: Yes/No
❑ Energy code application O Electric wall heater O Electric central furnace O LPG Furnace
O HP w/elec. Furn. O HP w/LPG fury O Boiler(heat type)
O Other: Specify M i4nm E
❑ Mechanical/plumbin application-WATER HEATER fuel type/location:
.B'Engineering? Yes4o - Snow Load: Seismic:
ck plan: APPROVED Snow Load: Seismic:
qb anufactured Ho es 4 FLOOR PLANS
e: ,aANSI/Manf.Method nO Engineered footing/found. rMBasement
Decks: ❑ Covered? ❑ Uncover over 4 x 6 and 30"? - construct.o_p�Plans required
Co struction Plans:113 COMPLETE SETS ���&-,'4 X U U h 0-c u/L-C&—
P legible ❑ Recognized scale 0 Elevation views 0 Cross section
Foun 'on plan Roof framin Floor plan s rooms no (all ors)
0 Floor all floor leve ❑ ck f g inclu ' ered porch framing
Plan Details:
❑ Roof framing details,truss layout may be needed(hip and girder location shown)
0 Wall framing-does bearing wall height exceed 10'(engineering may be required).
❑ Floor framing: floor joists spacing? floor beams:
❑ Window headers: typical header Garage door header:
0 Foundation: footing size,reinforcement
0 Concrete walls-does concrete wall height exceed (engineering may be required)
0 Landings at all exits? Less than 30"above Y/N
❑ Heated by furnace-location:
❑ Fireplace/stove information shown- el type: Location(s):
❑ Window sizes marked on plans
❑ Braced wall panels(shear s)marked on plans?
❑ 2-story garage: (en g may be required) lst story of two story D1-45% D2-55%
COMMENTS:
ENGINEERING REQUIRED
❑ Braced wall panels/brace wall lines are not marked on plans (R602.10)
❑ Amount and location of bracing does not meet minimum required in Table R602.10.0
DESIGN CRITERIA: All notes and details required as a result of the engineered analysis shall be transferred onto proposed building plans.
Wind 85 MPH, Exposure B(unless proven otherwise). Seismic Zone: ,Snow
IRREGULAR BUILDINGS R301.2.2.2.2
Irregular portions of structures shall be designed in accordance with accepted engineering practice. A portion of a building shall be
considered to be irregular when one or more of die following conditions occur:
❑ 1)Exterior braced wall line or BWP cantilevered or offset by more than 4'
❑ 2) a.Roof/floor is not laterally supported on all edges b.Portion of roof/floor extend>than 6 ft.beyond the braced wall line.
❑ 3)End of BWP extends more than 1 ft. over an opening more than 8 ft in width below.
❑ 4)Opening in a floor or roof exceed the lesser of 12 ft. or 50%of the least floor or roof dimension.
❑ 5)Portions of floor level are offset vertically
❑ 6)Shear wall lines do not occur in two perpendicular directions.
❑ 7)When a story above grade includes masonry or concrete construction(fireplaces/chimneys/veneer)entire_story shall be
designed in accordance with accepted engineering practice. Wpermit tech checklist—02-05-2008
J
Request To Revise An Approved Plan
Permit Number: BLD200 8 O I I ZZ1 Name i ,,, (2,D h r
Parcel Number Z3-S0 - 5 I __ Phone Number dayime ( )
Project Address Mailing Address
Please provide a complete, detailed description of the proposedxevisi n to 'he approved plans:
i
�!r enLQyx0.y1 r Q P
Are two sets of the revised plans or addendum indicating the changes included? ❑ Yes ',&;l No
Are the approved site plans included? I❑ YesFC, 4j �)Sj, No
Are the revisions clearly and accurately identified on the plans or addendum? ❑ Yes No
Does the plan contain an engineer's or architect's lateral or vertical analysis? ❑ Yes '5 No
If Yes, Has the engineer or architect approved this revision? ❑ Yes -E� No
Is a stamped and signed approval included with this request? ❑ Yes lb,No
(Note:No structural changes to a"designed"plan will be approved without the written consent of the engineer and/or architect of record.)
Does the proposed revision modify the footprint or location of the structure? [�NYes ❑ No
If Yes, Is a revised site plan, with all new setback dimensions included with this request?
Yes ❑ No
Additional Information:
Applicant's signature Date:
Office Use Only Received by:
Date Sent Assigned To Approved By Date
Original Valuation: $
r W
Additional Valuation:P. 4 1 Z -K-� o h I Sq. Ft. x$ $
Sq.Ft. x$ $
'E.H � �(J� �f 2(0 �� Total New Valuation $
Additional Fees:
❑ P.W. F —7 Additional Planning Dept. $
Additional Plan Review $
Additional Conditions/Comments: Additional Building Permit $
Additional Plumbing $
Additional Mechanical $
Additional E.H. Dept. $
Other $
Total Amount Due: $
Amount To Be Paid Up-Front$
MASON COUNTY PERMIT NO.
BUILDING PERMIT APPLICATION t r
426 W. Cedar • PO. Box 186, Shelton, WA 98584 J I rYL
Shelton (360) 427-9670 • Belfair (360) 275-4467 • Elma (360) 482-5269
On the web www.co.mason.wa.us
APPLICANT INFORMATION CONTRACTOR INFORMATION
Owner. 6\, Company Name !)ICI j:h'y PC 0-F pbui c6 j
Mailing Address' `t41 L4 1 V I Kk Etl F_ Mailing Address q j
City iLU ' State K Zip Code lfll ` & City < , State-"L tip Code
Phone � 1 ther Ph. Phone 7"O- -IWR.'in Other Ph.
Lien/Title Holder Contractor Reg.#(' 1)l.(7I-I'PCII?Z kl�Exp.
E mail address E Mail Address
Drivers Lic.# DOB 1,4 1 l.rI Drivers Lic.# DOB
SEPTIC /WATER SYSTEM INFORMATION - Connect to New Septic Existing Septic
Connect to Water System Name of Water System
Well Water System Name of Water System
PARCEL INFORMATION - 12 Digit Parcel No. Fire District c %
Legal Description giPQQrts C o\c Q \fit} 1 (,)A- LC
Site Address (Please include street name, street number and city) 431 NE. hRj1Q VZ ( RP I L( 'L kZ
Directions to site z 21 thill zcw AIN
Will timber be cut and sold in parcel preparation?Yes/.No
Is property within 200'of Saltwater Lake r' River/Creek A'') Pond
Wetland Seasonal Runoff Stream Slopes or Bluffs > 15%
Is this permit submittal the result of a Stop Work Notice,Correction Notice or other enforcement action?Yes/No
TYPE OF JOB - New Add Alt Repair Other PRIMARY RESIDENCE ❑ SEASONAL ❑
Use of Building .4a*E Qescribe Work IV) (� hCld,
No.of Bedrooms Z No.of Bathrooms 2- Square Footage - 1st Floor ('L� 2nd Floor
3rd Floor Basement Deck Covered Deck Other Sq.ft.
Garage Attached Detached Carport Attached Detached
MANUFACTURED HOME INFORMATION - Make Model {-r-r Year
Length L�TSidthZ:Serial No. r Z�g Z- k e No.of Bedrooms - No.of Bathrooms �---
Type of Heat =OgA A%� Sxu�ichase Price$ SObb Replacement Unit? es��Vo
Installer Name Certification No.
ONNER/BUILDER Acknowledges submission of inaccurate information may result in a stop work order or permit revocation.
Acknowledgement of such is by signature below.I declare that I am the owner,owners legal representative,or the contractor.I further
declare that I am entitled to receive this permit and to do the work as proposed in the application.I declare that I have obtained the permis-
sion from all the,necessary parties.If permission is required from any easement holder or any other party in interest regarding this applica-
tion or the work proposed in� the application, I have obtained permission from them to ap ly for this permit and conduct the work proposed.Z 08
X Date:
Owner/Owners Representative/Contractor (indicatd which one)
FOR OFFICIAL USE BEYOND THIS POINT
Accepted by: --Planning Pd Ck# Date (I O Bld Pd Receipt No.
DEPARTMENTAL REVIEW APPR VF9 DENIED NOTES
Building Department h toe
Planning Department
Environmental Health Department - -
Public Works Department -
Fire Marshal
FEES
Building Permit Fee r Site Inspection
Plan Review Fee EH Review Fee
Plumbing & Base Fee Planning Review Fee
Mechanical & Base fee Other
Wood/Gas/ Pellet Stove Fee State Fee
Violation Fee Pre-Paid at Submittal
Valuation $ TOTAL FEES